High-Power 400W 600W MOS Tube FET Trigger Drive Module PWM Control High / Low Level Trigger Switch DC 4V-60V 5V 12V 24V

High-Power 400W 600W MOS Tube FET Trigger Drive Module PWM Control High / Low Level Trigger Switch DC 4V-60V 5V 12V 24V

    

Description

36V 400W:
1. The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
2. Wide voltage, the perfect support for PWM
3. Easily control high power devices

Specifications and applications:
1: Operating Voltage: DC 5V – 36V;
2: The trigger source: digital high-low (DC3.3V – 20V), can be connected microcontroller IO port, PLC interfaces,
DC power, you can access the PWM signal, the signal frequency 0–20KHZ perfect support.
3: output capacity: DC DC 5V – 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary
cooling conditions, the maximum current up to 30A.
4: Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc. you can enter PWM, motor speed control, lamp brightness.
5: Availability: unlimited switch, Operating temperature: -40-85

60V 600W:
:Service life: Unlimited switching
:Working temperature: -40-85℃
:Size: 4.6*2.9*1.5cm
:Working voltage: DC 4V–60V
:Trigger signal source: high-level trigger (DC3.0V–24V), low-level trigger (DC 0.0V~0.6V), switch control, can be connected to MCU IO port, PLC interface, DC power supply, etc., can be connected to PWM Signal, signal frequency 0–2.5KHZ support
:Output capacity: DC 4V–60V, continuous current 10A at room temperature, power 600W! Under the condition of auxiliary heat dissipation, the current can reach 15A
:Application: The output terminal can control high-power equipment, motors, light bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc., can input PWM, control motor speed, lamp brightness, etc.

Applications:
:It can be used in solar landscape lights, solar warning lights, solar street lights, solar strobe lights, solar street signs, solar guide signs, solar monitoring systems, etc.;
:Replacing the battery with an adapter can also be used in non-solar powered places.
:The output voltage of the circuit board is approximately equal to the battery voltage. The circuit board does not have a lamp drive function. If the LED is directly connected to the output terminal, the LED lamp beads and the control board will be damaged.

Precautions:
:At the same time, only one signal can control the module, and two or more signals cannot be used to control the module at the same time.
:High-level trigger voltage range: DC3.0V~24V, that is, when the signal is 3.0V~24V, the MOS tube is turned on, if it is lower than 0.6V, that is, 0V~0.6V, the MOS tube is turned off, and the signal voltage must not be within 0.6V~3.0 Between V, so that the MOS is not fully open, and the high power use burns the MOS
:Low-level trigger voltage range: DC 0V~0.6V, that is, when the signal voltage is 0V~0.6V, the MOS tube is turned on, if it is higher than 3.0V, the MOS tube is turned off, and the signal voltage must not be between 0.6V~3.0V, so MOS is not fully open, high power use burns MOS

Package Included

1 Pcs  MOS FET Trigger Switch Drive Module