Buck Converter 200W 160W 100W 80W 15A 8A 6A 5A DC-DC 8-60V 48V TO 1-36V 5V 12V 24V 19V Buck Converter Step-Down Power Module

Buck Converter 200W 160W 100W 80W 15A 8A 6A 5A DC-DC 8-60V 48V TO 1-36V 5V 12V 24V 19V Buck Converter Step-Down Power Module

Description

200W 15A:

200W DC-DC high voltage power synchronous buck module

DC8-60V wide voltage input, 1-36V stepless adjustable output

The maximum peak output current 15A

Perfect ultra-efficient circuit design up to 94% Low Ripple

Parameter:

Name: 200W adjustable synchronous buck module

Type: Non-isolated step-down module (BUCK)

Aluminum housing Size: 70 x 38 x 31mm / 27.5"x15" x12"

Input voltage: DC8-55V (limit 60V, please leave allowance)

Output voltage: DC1-36V continuously adjustable (the default output 12V)

Output Current: Normal 10A , MAX15A

Output power: natural cooling ventilated long-term power 100W

To enhance heat dissipation up to 200

Such as long working hours, please note left margin and make the heat rise

Operating temperature: -10 to +85 degrees

Operating frequency: 180KHz

Conversion efficiency: up to 94%

Overcurrent protection: Yes (the output current exceeds (15A) current maximum sample protection only)

Reverse polarity protection: (reverse does not burn)

Wiring: high current terminals, solderless, IN + input is positive, IN- is the input negative, OUT + positive output, OUT- output negative

160W 8A:

Working frequency: 300KHz

Conversion efficiency: up to 95%

Output current: 0-8A (maximum)

Dimensions: 70mm x 39mm x 31mm

Operating temperature: -40 to +85 °C

Input voltage: 4.5-32V (please do not exceed 32V)

Output voltage: 0.8-30V (continuously adjustable)

Output power: 100W, 160W (enhanced heat dissipation)

Short circuit protection: yes (please try not to short circuit)

Voltage Conversion: 12 to 3.3V; 12V to 5V; 24 to 5V; 24V to 12V

Over-temperature protection: yes (automatically turn off the output)

Input reverse connection protection: Yes (can not be reversed for a long time)

Installation method: terminal, no need to solder

IN+: Input positive

IN- : input negative

OUT+: output positive

OUT-: output negative

Application:

Power Transformers

Battery step down, etc

Vehicle LED power supply

24V Car laptop power supply

Small power motor speed regulation

Industrial equipment depressurization

DIY adjustable regulated power supply

100W 6A:

Module nature: synchronous rectification non-isolated buck module

Input voltage: 10-90VDC

Output voltage: 1.5-60VDC (applicable to applications where the input voltage is higher than the output voltage and cannot be boosted)

Output current: Max 6A

Maximum power: 100W (maximum current 6A at low voltage output. 100W at high voltage output)

Working frequency: 180KHZ

Conversion efficiency: 97.5% (typical value)

Input anti-reverse connection: Yes

Aluminum shell size: 70MM * 38MM * 31MM

Weight: about 70g

80W 5A:

Size: 70 x 39 x 32 mm

Wide input voltage range: DC 6 -35V

Output voltage: DC 1 -35V

Conversion efficiency: 90%

Maximum output current: 5A

Maximum input current: 7A

Constant current adjustment range: 0.05A ~ 5A

Note:

1. Do not reverse the positive and negative terminals, otherwise this item will be damaged.

2. When working for a long time, the input current and output current may not reach the maximum value.

3. The auto boost/buck module supports input voltages above or below the output voltage.

4.90% conversion efficiency is measured as 12V input voltage and 19V / 2.5A output voltage.

5. Conversion efficiency is related to input and output voltage and current.

This is a voltage regulator module without constant current mode, so it cannot be connected directly to the battery.

Package Included

1 Pcs DC Step-down Module