Matek Mini Power Hub Power Distribution Board PDB with BEC 5V & 12V for FPV QAV250 ZMR250 Multicopter Quadcopter

Matek Mini Power Hub Power Distribution Board PDB with BEC 5V & 12V for FPV QAV250 ZMR250 Multicopter Quadcopter

Description

– 2oz copper & 4-layers PCB.  
– ESC & Battery solder tabs in pairs  
– Solder Bridges of various voltage for Camera & VTX.  
– DC/DC synchronous buck regulator, Efficiency is up to 95%.  
– TVS(Transient Voltage Suppressor) protection for DC/DC chip.  
– 5V & 12V Output LED indicators & Short circuit tolerant  
Specification:  
General:  
– Input voltage range (2S-6S operation): 7.2 – 26VDC  
– Regulated 5V and 12V outputs  
– LED power indicators ( 5V & 12V outputs )  
– 4 ESC outputs  
ESC outputs:  
– Continuous current: 20A per output  
– Peak current (10 seconds/minute): 30A per output  
BEC 5V output:  
– Designed for RC Receivers, Flight controllers, OSD, and Servos.  
– Voltage: 5.0 +/- 0.1VDC  
– Continuous current: 3 Amps  
– Short-circuit tolerant (10 seconds/minute)  
– LED (indicates voltage is in regulation, within 10%)  
BEC 12V output:  
– The battery should be 4S~6S LiPo  
– Standard output designed to power cameras and video transmitters,etc.  
– Voltage: 12.0 +/- 0.2VDC  
– Continuous current: 2 Amps (Max.3A 10s/minute)  
– Short-circuit tolerant (10 seconds/minute)  
– LED (indicates voltage is in regulation, within 10%)  
CAM & VTX voltage bridge  
– 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage.  
– 4~6S operation, choose 12 for 12V camera & 12V VTX  
– 3~6S operation, choose 5 for 5V camera  
– Video pass through from the CAM pad to the VTX pad  
Physical:  
– Dimensions: 36 x 36mm  
– Weight: 6g  
– Mounting holes 30.5mm square spacing  

Package Included

1 Pcs Power Distribution Board PDB