2/4/8 Channel IIC I2C Logic Level Converter Bi-Directional Board Module 2 4 8 Way DC 3.3V/5V with Pins for Arduino Raspberry Pi
Type 1:
AVCC connected to 5V system supply
ASCL connected to 5V systems SCL
ASDA connected to 5V systems SDA
GND AGND connected to 5V systems
BVCC pick 3V power supply system
BSCL pick 3V systems SCL
BSDA pick 3V systems SDA
BGND pick 3V system GND
Type 2:
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.
Dimensions: 0.63 x 0.52″ (16.05 x 13.33mm)
Type 3:
Conversion level range: 1.8V-6V
Module size: 36mm X 32mm
Instructions:( for example 3.3V, 5V system conversion)
VCCA connect to 3.3V power supply
VCCB connected to 5V power supply
GND negative one, two power supply common ground
Ax input 3.3V TTL level,Bx will output 5V TTL level
Ax input 5V TTL level,Bx will output 3.3V TTL level
Type 4:
Conversion level range: 1.8V-6V
Module size: 28mm X 27.5mm
Instructions:( for example 3.3V, 5V system conversion)
VCCA connect to 3.3V power supply
VCCB connected to 5V power supply
GND negative one, two power supply common ground
Ax input 3.3V TTL level,Bx will output 5V TTL level
Ax input 5V TTL level,Bx will output 3.3V TTL level
Type 5:
100% brand new and high quality
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side
The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV’ pin, low voltage (3.3V for example) to ‘LV’, and ground from the system to the ‘GND’ pin
Compatible with 5-3V system
VIN connected 5V system power supply
5A connected 5V system
5B connected 5V system
GND connected 5V system GND
3V3 connected 3V system power supply
3A connected 3V system
3B connected 3V system
GND connected 3V system GND
Size: 28 x 19mm / 1.1 x 0.74 inch
Reviews
There are no reviews yet.